Rival electric slicer manual

[Cymru Llewes]

Does anyone have a manual for an older Rival electric slicer? We seem to
be missing a piece or two and can't tell by looking at the machine what
is missing. We have the stand, motor, blade, slide, hand protector, and
most of what holds the blade in place. Rival's website doesn't have
a manual and a google search failed turn up anything more than sites
asking for the manual.

Thanks
--
Cymru Llewes
Caer Llewys

[limey]

Post by Cymru Llewes
Does anyone have a manual for an older Rival electric slicer? We seem to
be missing a piece or two and can't tell by looking at the machine what
is missing. We have the stand, motor, blade, slide, hand protector, and
most of what holds the blade in place. Rival's website doesn't have
a manual and a google search failed turn up anything more than sites
asking for the manual.

I have a Rival food slicer which is quite a number of years old - Model
1101E. Some years ago, I lost the original "Instruction and Idea Book", so
called them on the phone for a replacement. The little manual cites a
Customer Relations Department phone: [phone]. The numbers I called
were (Kansas City) 1-816-861-1000, with Parts and Service being
1-816-826-6600. Perhaps one of those numbers can help.

If my model matches yours, or if you have
Model 1030V, let me know and I can list the parts of the slicer(s). In that
way, you can see if anything is missing. I'd scan and e-mail to you, but
the print is so tiny I'm not sure it would reproduce well.
Good luck!

Dora

Post by Cymru Llewes
Thanks
--
Cymru Llewes
Caer Llewys

[Steve Calvin]

Post by Cymru Llewes
Does anyone have a manual for an older Rival electric slicer? We seem to
be missing a piece or two and can't tell by looking at the machine what
is missing. We have the stand, motor, blade, slide, hand protector, and
most of what holds the blade in place. Rival's website doesn't have
a manual and a google search failed turn up anything more than sites
asking for the manual.

I don't have a manual for mine (well, once upon a time I did) but you
shouldn't really need it. It sounds to me like you have most all of
the parts. The only thing that you didn't mention is the plastic
screw-on that holds the blade on. I won't post it here, but I can
mail you a pic. of the parts if you'd like.

[Cymru Llewes]

Post by limey
I have a Rival food slicer which is quite a number of years old - Model
1101E. Some years ago, I lost the original "Instruction and Idea Book", so
called them on the phone for a replacement. The little manual cites a
Customer Relations Department phone: [phone]. The numbers I called
were (Kansas City) 1-816-861-1000, with Parts and Service being
1-816-826-6600. Perhaps one of those numbers can help.
If my model matches yours, or if you have
Model 1030V, let me know and I can list the parts of the slicer(s). In that
way, you can see if anything is missing. I'd scan and e-mail to you, but
the print is so tiny I'm not sure it would reproduce well.
Good luck!
Dora

Model 1101E/3 (I dug it back out from the bottom cupboard and looked at
the motor housing.) I think that we'll call Rival tomorrow morning and ask
them to send us a manual.


Thanks
--
Cymru Llewes
Caer Llewys

[limey]

Post by Cymru Llewes

Post by limey
I have a Rival food slicer which is quite a number of years old - Model
1101E. Some years ago, I lost the original "Instruction and Idea Book", so
called them on the phone for a replacement. The little manual cites a
Customer Relations Department phone: [phone]. The numbers I called
were (Kansas City) 1-816-861-1000, with Parts and Service being
1-816-826-6600. Perhaps one of those numbers can help.
If my model matches yours, or if you have
Model 1030V, let me know and I can list the parts of the slicer(s). In that
way, you can see if anything is missing. I'd scan and e-mail to you, but
the print is so tiny I'm not sure it would reproduce well.
Good luck!
Dora

Model 1101E/3 (I dug it back out from the bottom cupboard and looked at
the motor housing.) I think that we'll call Rival tomorrow morning and ask
them to send us a manual.
Thanks
--
Cymru Llewes
Caer Llewys

If you're unsuccessful in getting a manual, get back to me and I'll see what
I can reproduce.

Dora
limey at toad dot net

[l***@gmail.com]

I'm looking for a manual for model C1174 Rival slicer, does anyone have one, I've sent Rival a note but because it is an older machine, they don't have it. Thank you to anyone that can help me.

Lori from Canada

[l***@gmail.com]

Post by l***@gmail.com
I'm looking for a manual for model C1174 Rival slicer, does anyone have one, I've sent Rival a note but because it is an older machine, they don't have it. Thank you to anyone that can help me.
Lori from Canada

Further to my note I can't even find an on/off switch and the blade does not move when I plug it in, before I turf it, I'm just wondering if there is a trick to this. It looks as though it were hardly used.

Lori from Canada

[l not -l]

Post by l***@gmail.com

Post by l***@gmail.com
I'm looking for a manual for model C1174 Rival slicer, does anyone have
one, I've sent Rival a note but because it is an older machine, they
don't have it. Thank you to anyone that can help me.
Lori from Canada

Further to my note I can't even find an on/off switch and the blade does
not move when I plug it in, before I turf it, I'm just wondering if there
is a trick to this. It looks as though it were hardly used.
Lori from Canada

I sell parts and have PDF manuals for some Rival slicers; but, I am not
familiar with this one. Is this one of the metal framed models (siimilar to
1101 and 1030) or is it plastic framed (like the 104x series)? I you could
post a photo, either here or a link here to tinypic or similar, I might be
able to help, based upon familiarity with other models.

[t***@gmail.com]

It looks like it blow a fuse what can I do